Stand Up Doy Pack With Re-Sealable Gripper

2x50mm Gusset
A91 Bright


  • Manufactured in the UK
  • Packed in 250, 500 & 1000’s
  • A foil laminate stand up doy pouch
  • Includes a tear notch and a re-sealable gripper
  • Bespoke sizes or printed bags available upon request


  • Water Vapour Barrier
  • Oxygen Barrier
  • Light Barrier
  • Aroma Barrier

All deliveries come with a Certificate of Conformity and Food Contact Certification.

If you need more pouches or a different specification then please contact us at and we will be happy to help.

  • Packaging Type
  • Colour
  • Microns & Weight
  • Length
  • Width
  • Gusset
  • Pack Sizes
  • Doypack with re-sealable gripper
  • Bright Silver
  • 96 microns & 15 grams
  • 250 mm (9.8″)
  • 200 mm (7.9″)
  • 2 x 50 mm (1.9″)
  • 250, 500 & 1000

Sizes stated can be +/- 2mm.


Foil Laminate constructed of 12microns Polyester x 9microns Aluminium Foil x 70micron Low Density Polythene Film. Laminated Bright side of foil out. Foil laminate pouch for general packaging use, such as sensitive food and pharmaceutical products that require excellent protection against oxygen, water vapour, light and aroma.

Compliant with European legislation 10/2011 and 1935/2004EF for use in contact with food. Compliant with European Directive 94/62 (2004/12/EC and 2005/20/EC on safe levels of heavy metals. Laminate has been manufactured without ingredients of animal origins and therefore do not constitute any risk of transfer of BSE or TSE. The laminate does not include any post-consumer re-cycled material. Each pack supplied contains a Declaration of Compliance and full specification details.

Full Traceability of final product via label pack to comply with BRC/IOP guidelines. Fitted with a re-sealable gripper approx. 30mm from the top to the centre of the gripper. Tear notch 12mm from the top of the bag. The pouch needs a final heat seal above the tear notch at the top to make it tamper evident. Once heat sealed the tear notch needs to be used to tear the bag open and access the product inside.

Care must be taken when filling with fine powders so as to not obstruct the operation of the gripper re-seal feature. Bespoke sizes can be manufactured on request via our Contact Us page. VAT receipts can be requested via our webpage. Recommendations on suitability can be requested via our webpage, but the ultimate responsibility on this decision, (should it fall outside the scope) must remain with the user.